Enjoy this Free Printable Vintage Rainbow Pinwheel for any type of Party!
We’ve put together a Free Tutorial as well, just to help you out with some of the tricky steps.
We’ve put together a Free Tutorial as well, just to help you out with some of the tricky steps.
Access your Free Download below, and have fun creating pinwheels for your next party!
Step 1: Print & Cut out both squares on each Pinwheels Sheet, and the center circle.
Step 2: Glue Pinwheel front sheet to back sheet, lining up the edges.
Step 3: Smooth out glued sheets, making sure they have stuck to each other completely. Then, cut along dotted lines, making sure you stop where the lines stop.
Step 4: Pull the Left-Hand corner of each cut edge into the centre and hold in place. Then, secure all pieces with a pin. Make sure when securing with the pin, that you push through all corners and that you push through to the black dot at the back, so it’s centered.
Step 5: When your pin is secure in the pinwheel, push the pin through your straw or stick.
Step 7: Add a piece of double-sided poster tape to the circle, and stick it to the front of the pin and your done!
Step 6: Cover the pointed end at the back of the pin with plastecine or blu-tac. Make sure the pinwheel isn’t too close to the straw/stick, and that it can move freely when blown gently.
You can mix and match with the front and back of the pinwheels, to create alternative versions.
Have fun creating and Enjoy! xo Amy
Have fun creating and Enjoy! xo Amy